Manifolds with Hydraulic Separator

The KHS22VN.125(150) Mini manifold with hydraulic separator is a compact Termojet 2-in-1 unit for small boiler rooms: a distribution manifold and hydraulic separator in a single housing. Two main outlets (one upward, one downward) and one side outlet G1/2, boiler and circuit connections -- 1 inch. Output up to 25 kW at delta-T 10 C and up to 50 kW at delta-T 20 C. The KHS22VN differs from the KHS22V in its combined outlet arrangement: one upward, one downward. This allows connecting two pump groups from different sides -- convenient when one pipe run goes upward (e.g., an underfloor heating circuit) and another goes downward (radiators or a DHW cylinder). Centre distance 125 mm -- standard for Termojet 1-inch pump groups. Side outlet G1/2 for a sensor or small circuit. Wall-mounting brackets included.

The KHS22V.125(150) Mini manifold with hydraulic separator is a compact Termojet 2-in-1 unit for small boiler rooms: a distribution manifold and hydraulic separator in a single housing. Two main outlets upward and one side outlet G1/2, boiler and circuit connections -- 1 inch. Output up to 25 kW at delta-T 10 C and up to 50 kW at delta-T 20 C -- optimal for a home boiler up to 200 m2. The KHS (manifold with hydraulic separator) allows connecting a boiler and two pump circuits without an external hydraulic separator: hydraulic decoupling is built in. Termojet pump groups with a 125 mm centre distance are mounted on the main outlets; the side outlet G1/2 is for a sensor or an additional small circuit. Upward outlets are convenient for pipe runs passing above the manifold. Wall-mounting brackets included. The outlets accept a NG-46 pump group with thermostatic valve (underfloor heating) or a direct NG-47 without mixer (radiators, DHW). If outlets are needed downward and upward rather than both upward, consider the KHS22VN.125(150) Mini . If a hydraulic separator is not required, consider the standard K22V.125(150) Mini . Advantages of the KHS22V Mini from Termojet: 2-in-1 -- manifold and hydraulic separator in a single housing, no separate hydraulic separator required; compact form factor -- fits in a small boiler room or cabinet; 125 mm standard -- full compatibility with Termojet 1-inch pump groups; thermal insulation jacket and brackets included; Ukrainian manufacture, competitive price, official warranty. Technical specifications: outlets -- 2 upward + 1 side G1/2, boiler and circuit connections -- 1 inch, maximum output 25 kW at delta-T 10 C and 50 kW at delta-T 20 C , maximum flow rate 2.1 m3/h, centre distance -- 125 mm. Other configurations -- in the Termojet manifold with hydraulic separator catalogue . Termojet units are equally effective in low-temperature systems: if you are designing heating with a heat pump, explore the range of Termojet heat pumps .

Manifold with hydraulic separator KHS31VN.125 -- a compact Termojet 2-in-1 unit for boiler rooms of private homes and small commercial properties: a distribution manifold and hydraulic separator in a single housing with three main outlets (two upward and one downward) and one side outlet G1/2, boiler and circuit connections -- 1 inch. Output up to 25 kW at delta-T 10 C and up to 50 kW at delta-T 20 C. The KHS31VN combines three functions: hydraulic separation (built-in hydraulic separator), distribution of heat transfer fluid across three independent circuits (two upward and one downward) and one additional small outlet G1/2. Centre-to-centre spacing between the three main outlets -- 125 mm, standard for Termojet 1-inch pump groups. Housing with thermal insulation, wall-mounting brackets included.

Manifold with hydraulic separator KHS22N.125(150) Mini -- a compact Termojet 2-in-1 unit: a distribution manifold and hydraulic separator in a single housing for small boiler rooms. Two main outlets pointing downward and one side outlet G1/2, boiler and circuit connections -- 1 inch. Output up to 25 kW at delta-T 10 C and up to 50 kW at delta-T 20 C. The KHS22N has both main outlets pointing downward: suitable for boiler rooms where pump groups and pipework run below the manifold. Centre-to-centre spacing 125 mm -- standard for Termojet 1-inch pump groups. Side outlet G1/2 for a sensor or small circuit. Hydraulic separation is built in. Wall-mounting brackets included.

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Manifold with hydraulic separator KHS32V.125(150) Mini -- a compact Termojet 2-in-1 unit for private home boiler rooms: a distribution manifold and hydraulic separator in a single housing. Three main outlets upward and one side outlet G1/2, boiler and circuit connections -- 1 inch. Output up to 25 kW at delta-T 10 C and up to 50 kW at delta-T 20 C -- for homes up to 200 m2. KHS32V -- the three-outlet version of the compact KHS Termojet manifolds with upward outlets. Hydraulic decoupling is built in; no external hydraulic separator is required. Centre-to-centre distance 125 mm -- standard for Termojet 1-inch pump groups. Side outlet G1/2 for a sensor or small circuit. Housing with thermal insulation, brackets included.

Manifold with hydraulic separator KHS32N.125(150) Mini -- a compact Termojet 2-in-1 unit with a three-downward outlet configuration: a distribution manifold and hydraulic separator in a single housing. Three main outlets downward and one side outlet G1/2, boiler and circuit connections -- 1 inch. Output up to 25 kW at delta-T 10 C and up to 50 kW at delta-T 20 C -- for homes up to 200 m2. KHS32N -- the three-outlet version of the compact KHS Termojet manifolds with downward outlets. Suitable for boiler rooms where pump groups and pipework run beneath the manifold. Hydraulic decoupling is built in. Centre-to-centre distance 125 mm -- standard for Termojet 1-inch pump groups. Side outlet G1/2 for a sensor or small circuit. Housing with thermal insulation, brackets included.

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Manifold with hydraulic separator KGS42VN.125(150) Mini — a compact Termojet "2-in-1" unit of the Mini series (old part number SK-281.125): a distribution manifold with 4 outlets up + down and 1 side with a built-in GS-25 hydraulic separator. Designed for systems up to 25 kW at ΔT=10 °C (up to 50 kW at ΔT=20 °C) — the typical output of a boiler or heat pump for a private house. How it works: the built-in hydraulic separator hydraulically decouples the heat generator circuit from the consumer circuits — the pumps operate independently and each circuit gets its own flow rate. The manifold section distributes the heat carrier to five consumers: four main outlets in two tiers (up and down) plus a side outlet. The center-to-center spacing of the ports is 125 mm , the standard for Termojet 1″ pump groups. The built-in air separator (½″ FT air-vent connection) and sludge trap with a ½″ FT drain clean the heat carrier of gases and dirt. Application scenarios: a house with multi-zone underfloor heating, radiators and a DHW tank — a compact boiler room with five circuits on a single unit. Arranging the outlets in two tiers saves wall width. Thanks to hydraulic decoupling, the Mini is well suited for connecting low-temperature heat-pump systems — see Termojet heat pumps . The underfloor circuit is connected with a NG-46 pump group with a 25–55 °C thermostatic valve ; for boiler rooms with fewer circuits there is the KGS22V.125(150) Mini with 2 outlets up + 1 side . Advantages of the KGS Mini by Termojet: five circuits + hydraulic separator in one compact body; outlets up and down — flexible arrangement of pump groups; air and sludge separation — protection of the entire heating system; thermal insulation included, in-house manufacturing in Ukraine, manufacturer's warranty. Technical specifications: outlets — 4 up + down and 1 side, maximum output 25 kW at ΔT=10 °C and 50 kW at ΔT=20 °C , maximum flow rate 5.1 m³/h, boiler connection — 1″, circuit connections — 1″, center-to-center spacing — 125 mm. Other configurations are in the catalog of Termojet manifolds with hydraulic separator . FAQ What does the Mini series mean? These are compact KGS units with a 1″ boiler connection for systems up to 25 kW at ΔT=10 °C — the optimal format for a private-house boiler room. Does the unit remove air and sludge? Yes: a built-in air separator with an outlet for a ½″ FT air vent and a sludge trap with a ½″ FT drain connection.

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26

Description The manifold for boiler rooms is used in heating systems where the heat carrier needs to be distributed to several heat consumers with different parameters. The manifold is combined with hydraulic separator GS-26