Sale

Automatic air vent Termojet DN15 (1/2") — a float-type device for continuous removal of free air from heating and cooling systems. Installed at the highest point of the circuit, where air pockets accu

Automatic air vent Termojet DN20 (3/4") — a float-type device for continuous air removal from pipelines with a diameter of DN20. Installed at the top point of the heating or cooling system — where air

Automatic air vent Termojet DN25 (1") is designed for systems with inch-diameter pipelines. The float mechanism automatically monitors air accumulation and releases it without manual intervention — ev

TJ-MAG — removable magnetic ring accessory manufactured by Termojet for TJ-CD series dirt separators . Enhances the efficiency of heat-transfer fluid purification: attracts magnetite, iron oxides and

The TJ-CD-DN20 dirt separator protects the boiler, pump, and heat exchanger from mechanical contaminants: rust, sand, sludge, and magnetite. Connection DN20 (¾″) , maximum temperature 110°C , pressure

TJ-CD-DN25 — DN25 dirt separator with a removable magnetic ring.

The TJ-CD-DN32 dirt separator protects the pump, boiler, and heat exchanger from mechanical contaminants in systems with DN32 (1¼″) pipework.

TJ-CD-DN40 is a DN40 dirt separator with a removable magnetic ring. It combines gravitational separation of solid particles and magnetic capture of magnetite in one compact body.

Dirt separator TJ-CD-DN50M is an industrial-class device for protecting large heating systems against mechanical contamination. Connection DN50 (2″), flow rate up to 7,5 m³/h.

TJ-CA-DN20 is an air microbubble and dissolved gas separator for DN20 heating systems. It is installed immediately after the boiler on the supply pipe — at the hottest point in the system, where gas i

The TJ-CA-DN25 air separator removes microbubbles and dissolved gas from the heating fluid in heating systems with a DN25 (1″) connection. Invisible microbubbles reduce heat transfer efficiency, cause

TJ-CA-DN32 — a microbubble and dissolved gas separator for DN32 heating systems. Designed for systems with an output of 30–60 kW where DN32 is the main diameter of the supply pipe. Installed after the

The TJ-CA-DN40 air separator removes microbubbles and dissolved gas from the heat-transfer fluid in large systems with DN40 (1½″) pipework and flow rates up to 5.0 m³/h . Microbubbles — invisible gas

The TJ-CA-DN50M is a microbubble and dissolved gas separator for large DN50 heating systems.

The combined separator TJ-CAD-DN25 simultaneously removes micro air bubbles and mechanical impurities from the heat carrier.

TJ-CAD-DN32 — combined air and dirt separator for DN32 heating systems. A single body simultaneously removes air microbubbles and solid sludge particles — without stopping the system, without addition

The TJ-CAD-DN40 combined separator removes air microbubbles and mechanical impurities from the heat-transfer fluid in systems with a DN40 (1½″) connection and a flow rate of up to 5,0 m³/h.

TJ-CAD-DN50M — combined air and dirt separator for large DN50 heating systems. A single body simultaneously removes micro-bubbles of gas and solid contaminants from the heat-transfer fluid at flow rates up to 7,5 m³/h.