Manifold Termojet in thermal insulation 3 down + 1 side Mini MHS32D125(150)

Manifold with hydraulic separator KGS32N.125(150) Mini — a compact Termojet "2-in-1" unit with a configuration of 3 outlets downward + 1 lateral and a built-in hydraulic separator. A single body hydraulically separates the boiler circuit from the secondary consumer circuits while simultaneously distributing the heat transfer fluid to four outlets. Capacity — up to 25 kW at ΔT=10 °C and up to 50 kW at ΔT=20 °C, maximum flow rate 5.1 m³/h.

The difference from KGS22V Mini lies in the direction of the three main outlets: here they are directed downward, which is convenient when the circuit pipe runs go below the manifold level, or the boiler is placed in the upper part of the room. The built-in hydraulic separator creates a low pressure-loss zone between the primary and secondary circuits, the air separator vents gases to the air vent (connection G ½″), the sludge trap collects sediment in the lower part of the body — drained through a valve G ½″. Centre-to-centre spacing of connections — 125 mm, the standard for Termojet pump groups.

Applications: a private house with three zones (underfloor heating, radiators, DHW) and a lateral outlet for a fourth zone or auxiliary connection; boiler rooms in built-in premises with downward piping. The downward-outlet solution is especially convenient for systems where pipe runs are concealed under the boiler room floor. For a heat pump: a combination of separation and distribution in one compact unit — see Termojet heat pumps. The main outlets accept pump group NG-46 with thermostatic valve or direct NG-47.

Advantages of KGS32N Mini from Termojet:

• three downward outlets + one lateral — compact routing for systems with underfloor piping;
• hydraulic separator, air and sludge separation in a single body;
• 125 mm standard and thermal insulation included — ready for installation;
• own manufacturing in Ukraine, affordable price, official manufacturer's warranty.

Technical specifications: outlets — 3 downward + 1 lateral, boiler and circuit connection — 1″, air vent connection — G ½″, drain connection — G ½″, maximum capacity 25 kW at ΔT=10 °C and 50 kW at ΔT=20 °C, maximum flow rate 5.1 m³/h, centre-to-centre spacing — 125 mm. Full product range — in the catalogue of Termojet manifolds with hydraulic separator.

Frequently Asked Questions

When to choose downward outlets instead of upward?
When the pipe runs go below the manifold level — for example, if the routes are concealed under the boiler room floor or the boiler is placed in the upper part of the room. Upward outlets are more convenient if pipes lead upward or equipment is located above the manifold.

How many circuits does the KGS32N Mini support?
Four: three main downward outlets (for 125 mm pump groups) and one lateral. Total capacity — up to 50 kW at ΔT=20 °C for all circuits combined.