Pump group Termojet with mixer 1 1/4" FT in thermal insulation without pump PG-52L

Pump group with mixer NG-52.150 L — a Termojet unit of enlarged size 1¼″ BSP for circuits with automatic supply temperature control. Output up to 45 kW at ΔT=10 °C and up to 85 kW at ΔT=20 °C, Kvs 10.3 m³/h — the solution for large buildings and boiler rooms where standard 1″ groups are no longer sufficient. The left-hand configuration (L) is convenient for mounting on a manifold with pipework on the left.

The operating principle is based on return water blending: a three-way valve with electric actuator doses cooled fluid from the return line into the circuit supply. The boiler room automation controls the actuator based on the measured temperature — the result: the circuit receives a stable supply temperature regardless of boiler operating mode. Ball valves with 0–120 °C thermometers on the supply and return lines allow the actual differential to be monitored and the circuit to be isolated for maintenance; the built-in check valve eliminates parasitic circulation between adjacent circuits.

Applications of the NG-52.150: underfloor heating for high-capacity sections, low-temperature radiator heating in large buildings, systems with solid-fuel and gas boilers with per-circuit temperature control, low-temperature heat pump circuits — where a stable supply temperature is critical for efficiency. It is mounted on Termojet manifolds with 1¼″ outlets, including K32N.125 (3+1, outlets down); hydraulic separation for a powerful system is provided by the hydraulic separator GS-27 1½″. For projects with a heat pump — see Termojet heat pumps.

Advantages of the NG-52.150 from Termojet:

• enlarged size 1¼″ — up to 85 kW without excessive fluid velocity;
• three-way valve with electric actuator included — ready for automation connection;
• thermal insulation jacket and union nuts — quick installation without welding;
• manufactured in Ukraine, price without import mark-ups, official warranty.

Technical specifications: output 45 kW at ΔT=10 °C and 85 kW at ΔT=20 °C, Kvs 10.3 m³/h, connection to manifold and circuit — 1¼″ BSP, working pressure up to 3 bar, height 471 mm, width 296 mm, depth 160 mm, volume 1.1 l. Pump installation length — 180 mm; pump not included — the Termojet APE 25-60 pump (180 mm) is suitable. Full product range — in the Termojet pump groups catalogue.

Frequently Asked Questions

Which pump is suitable for the NG-52.150?
A pump with an installation length of 180 mm. For circuits near the maximum output of the group, we recommend the Termojet APE 25-60 (180 mm).

Can the NG-52.150 be mounted on a Mega manifold?
Yes. Mounting on a Mega manifold is carried out via adapter PNG50/32; KP21.250.150.