Surface-mount manifold cabinet Termojet No.02 (6-8 outlets, 565×600×125 mm)

Termojet Manifold Cabinet No. 02 External (surface-mounted) — protects and conceals the underfloor heating manifold with 6–8 outlets, mounting directly on the wall surface without cutting a recess. Dimensions 565×600×125 mm (width × height × depth) provide sufficient space for the manifold with air vents and drain. Galvanized steel, decorative doors — the assembly looks neat and remains fully accessible.

Technical Specifications

Purpose and Installation Principle

The external cabinet is fixed to the wall with anchors through the mounting holes in the rear panel — no recess-cutting work is required. A depth of 125 mm (15 mm more than the recessed version) compensates for the absence of an inset and provides more space for pipe distribution. The bottom is perforated — pipes are routed into the screed or into the wall from below. A height of 600 mm (25 mm more than the recessed version) also allows for a more open arrangement of fittings.

Installation is possible at any stage — including after finishing work is complete, when cutting a recess is no longer feasible or practical. The cabinet projects 125 mm from the wall — this should be taken into account when planning the space in a utility room or stairwell.

Applications

• Renovation or ongoing refurbishment. The most common scenario — the underfloor heating system is installed in a building where the walls are already plastered or clad. Cutting a recess damages the finish, whereas the surface-mounted cabinet is installed in a few hours.
• Thin partition walls. Interior partition walls 80–100 mm thick do not allow a recessed cabinet with a depth of 110 mm to be fitted. The external cabinet is the only option.
• Utility room or boiler room. Where aesthetics are less critical but installation speed matters — the external cabinet installs twice as fast.
• Manifold with 6–8 outlets. Cabinet No. 02 accommodates the flow meter manifold with 7 outlets or the 6-outlet manifold — the length does not exceed 450 mm, and the cabinet width of 565 mm provides sufficient clearance.

Advantages of the Termojet No. 02 External Cabinet

• Surface mounting without recess cutting — suitable for any wall and any stage of renovation.
• Depth of 125 mm — more space for pipe connections and fitting arrangement compared to the recessed version.
• Galvanized steel — corrosion protection in high-humidity conditions near pipework.
• Size No. 02 matches the 6–8-outlet manifold — no need to source non-standard solutions.
• Recessed alternative — recessed manifold cabinet No. 02 (565×575×110 mm) for installation in a recess, if the wall construction allows.

Frequently Asked Questions

What is the difference between the external and recessed cabinet?
The recessed manifold cabinet No. 02 recessed is installed in a wall recess — once fitted, it does not protrude. The external cabinet is fixed to the wall surface and projects 125 mm. The recessed version looks neater in living spaces; the external one is simpler to install and suitable for any wall. Functionally both are identical.

Which cabinet should I choose for a 6-outlet manifold?
Cabinet No. 02 is designed for 6–8 outlets and is suitable for the flow meter manifold with 6 outlets. For 4–5 circuits a smaller cabinet is sufficient — refer to the Termojet underfloor heating system catalogue, which covers cabinets from No. 00 (2–4 outlets) to No. 06 (14–16 outlets).