Manifold Termojet in thermal insulation 3+1 up M32U125(240)

Distribution manifold K32V.125(240) — a Termojet unit with thermal insulation for 3+1 circuits with top outlets and increased capacity: up to 105 kW at ΔT=10 °C and up to 210 kW at ΔT=20 °C thanks to the enlarged 1½″ boiler connection. The unit is supplied assembled, with thermal insulation, ready for wall mounting.

The manifold combines supply and return lines in one body: the heat carrier from the heat generator is distributed to circuits with 1″ outlets to which pump groups are attached. The centre-to-centre distance of the circuit connection ports is 125 mm: Termojet 1″ pump groups mount directly. An additional equipment connection G ½″ is provided — for a pressure gauge or temperature sensor.

Application areas: large private homes and small commercial premises with three to four consumers — underfloor heating, radiators, DHW boiler, ventilation; medium-capacity boiler rooms with several pumped circuits. It is also suitable for the pipework of powerful low-temperature systems — see Termojet heat pumps. Hydraulic separation of a multi-pump system is provided by the hydraulic separator GS-27 1½″ — its connection size matches the manifold's boiler connection, and the pump group NG-46 L with thermostatic valve is suitable for the underfloor heating circuit.

Advantages of the Termojet manifold:

• 1½″ boiler connection — capacity reserve up to 210 kW;
• 125 mm standard — full compatibility with pump groups;
• thermal insulation and wall-mounting brackets included in the delivery set;
• Ukrainian production with warranty — no import surcharges.

Technical specifications: number of outlets — 3+1 (top), capacity 105 kW at ΔT=10 °C and 210 kW at ΔT=20 °C, maximum flow rate Gmax 9.1 m³/h, boiler connection — 1½″, heating circuit connection — 1″, centre-to-centre distance — 125 mm.

Other configurations — 2+1, 4+1, with bottom outlets and combined — are in the Termojet distribution manifold catalogue.

Frequently asked questions

How many consumers can be connected?
Four: three main top outlets with 125 mm centre-to-centre distance for pump groups plus one additional outlet.

Which hydraulic separator is suitable for this manifold?
GS-27 with a 1½″ connection — the same size as the boiler inlet, so the pipework assembly requires no transitions.