Stand for heat pump outdoor unit Termojet up to 260 kg

The Termojet bracket for the heat pump outdoor unit is a galvanised steel structure rated for loads of up to 260 kg. It is suitable for wall and floor mounting of outdoor units from any manufacturer and comes complete with anti-vibration mounts that absorb compressor vibration. Three-plane adjustment allows the unit to be levelled even on uneven surfaces.

Technical Specifications

Operating Principle

The bracket fixes the outdoor unit to a building wall or the floor of a technical room, raising it to the required height above the snow level or drainage zone. Adjustable brackets allow precise horizontal levelling of the unit. The built-in anti-vibration mounts between the metal structure and the unit housing dampen compressor vibration — this reduces structure-borne noise transmitted through walls and extends the service life of the fixings. Galvanising protects the steel against corrosion during year-round outdoor exposure.

Applications

• Facade mounting on a residential building. Wall mounting raises the outdoor unit above snow level and out of reach of children, without taking up ground space near the building.
• Floor mounting in a technical area. For hard surfaces — concrete apron, terrace, technical platform — the bracket provides a stable horizontal base with the required clearance from the surface.
• Replacement of damaged or temporary brackets. Universal fixing dimensions suit units from various manufacturers weighing up to 260 kg — the standard range for domestic and semi-commercial heat pumps.
• New heat pump installations. In turnkey installations, the Termojet bracket is included in the installation kit as a certified fixing element.

Termojet Advantages

• 2 mm galvanised steel — rigid structure resistant to corrosion during year-round outdoor use.
• Load capacity up to 260 kg — covers the full range of domestic and semi-commercial outdoor units.
• Three-plane adjustment — precise levelling of the unit even on uneven surfaces.
• Anti-vibration mounts included — compressor vibration damping without additional cost of anti-vibration pads.
• Dual mounting option — wall and floor without changing the structure.

Bracket and Heat Pump

Correct mounting of the outdoor unit is one of the conditions for the proper operation of the heat pump. Positioning too low leads to the unit icing over with snow; insufficient clearance from the wall causes recirculation of already-cooled air and a drop in COP. The Termojet bracket provides the necessary clearance and height, while the anti-vibration mounts protect the building structure from vibration transmission. For more information on installation and heat pump selection, visit the Termojet heat pumps website.

Frequently Asked Questions

Is the bracket compatible with outdoor units from different manufacturers?
Yes. The bracket is rated for loads up to 260 kg and has adjustable brackets — it is compatible with outdoor units from all common heat pump manufacturers in this weight range. Ensure that the weight of your unit does not exceed the stated load capacity.

At what height should the outdoor unit be mounted for wall installation?
The minimum height of the bottom edge of the unit above ground level is at least 30–50 cm above the typical snow cover in your region, plus clearance from the surface for free condensate drainage. For most installations in Ukraine this is 50–80 cm. Detailed requirements for the installation location are given in the manual for the specific heat pump.