Surface-mount manifold cabinet Termojet No.04 (10-12 outlets, 795×600×125 mm)

Termojet external manifold cabinet No. 04 (surface-mount) — a metal housing for open wall-surface installation of an underfloor heating manifold with 10–12 outlets. Dimensions: 795×600×125 mm (width × height × depth). Made of galvanised steel with decorative doors. Suitable for any wall type — installation without chasing, fastened to the surface only.

Technical specifications

Selection principle and differences from the recessed cabinet

The Termojet external cabinet No. 04 is mounted directly on the wall surface — no niche, no chasing required. Body depth 125 mm — 15 mm greater than the recessed version No. 04, allowing the cabinet to accommodate the manifold together with connections. Height 600 mm — 25 mm taller than the recessed version, providing additional space for pipe connections at the top and bottom. Inside the cabinet the manifold is secured on brackets; the doors close and conceal the pipework.

Difference from the recessed version: the external cabinet projects 125 mm from the wall. This is acceptable in utility rooms, boiler rooms, and corridors — where aesthetics are less critical or a niche is not possible (load-bearing wall, monolithic reinforced concrete, renovation without chasing).

Where it is used

• Renovation without chasing. Load-bearing wall, reinforced concrete, or brick — where cutting a niche is impossible or undesirable. The external cabinet mounts on any solid surface.
• Utility room, boiler room, basement. Where a protruding cabinet is not an obstacle and quick access to the manifold is important.
• System with 10–12 circuits. Large house — 10–12 independent underfloor heating zones in a single cabinet.
• Temporary or rental property. The cabinet is bolted in place and can be removed together with the system without leaving marks on the wall.

Advantages

• Installation without a niche — fastened to any wall; no chasing works.
• Galvanised steel — moisture-resistant, suitable for boiler rooms and utility areas.
• Exact size for 10–12 outlets — the cabinet is matched to the specific manifold size.
• Access without disassembly — doors open, adjustment at any time.
• Range No. 00 – No. 06 — full assortment of external cabinets for any number of circuits from 2 to 16.

Frequently asked questions

How does the external cabinet differ from the recessed one?
External cabinet No. 04 is fastened to the wall surface and projects 125 mm — no chasing required. Recessed cabinet No. 04 is installed in a niche and does not protrude — the wall remains flat. Choose the external version where a niche is not possible; the recessed version where aesthetics matter.

Which manifold is compatible with cabinet No. 04?
Cabinet No. 04 is designed for manifolds with 10–12 outlets. We recommend the 11-outlet manifold with flow meters for precise balancing of a large system. The full range is available in the Termojet underfloor heating system catalogue.